ÜRÜNLER
CARBOLINE ROOF RIDGE
The ridge applications should be done by screwing 100 mm from below to the profile. 2. Plate applications should be made by screwing to a profile at every 700 mm and the screw gaps should not exceed 800 mm. 3. Wind direction should be considered when applying material. 4. It is recommended to use the […]
Devamı...COLORED GALVANIZED RIDGE
Roof Ridge Thickness: 0.40 mm – 0.70mm, Roof Ridge Angle of Bend: 1350, Length before Bending: min. 600 mm, Max. 1000 mm.
Devamı...THE GALVANIZED ROOF RIDGE
Roof Ridge Thickness: 0.40 mm – 0.70mm, Roof Ridge Angle of Bend: 1350, Length before Bending: min. 600 mm, Max. 1000 mm.
Devamı...WIDE WRAPPING
As an alternative to the panel groove, it is in our stock with 6 m long form.
Devamı...PANEL GUTTER
It is used for panel roof systems and it can be drawn in special sizes according to customer demands in our machines with a thickness of 6 meters.
Devamı...NARROW GROOVE
It is used for Trapeze roof systems and it can be processed from the steel sheets with 1.10 / 1.20 thickness in our machines in 6 meter standarts according to customer requests.
Devamı...